T-Max® Software Upgrade

What is it?
In order to use the new Rejuvasun™ and Lumagen™ spa beds your T-Max manager or Manager Pro need to have the latest software installed. Follow the instructions below to determine if you need the upgrade, and how to install it.

Do I need it?
You must have software version 4.15 installed and running on your T-Max Manager, Manager Plus or Manager Pro to properly control the new Rejuvasun and Lumagen spa beds.

T-Max Manager
Unplug power to the Manager and plug it back in. Displays 1, 7 and 8 will briefly show numbers. Display 8 must show "41" and display 1 must show "5" or higher. If your Manager does not show the proper numbers in display 1 and 8 when plugged in you will need to install the new software.

T-Max Manager Plus and Pro
Unplug power to the Manager Plus or Pro and plug it back in. A number will appear in the lower right corner of the display while the Manager scans for tanning beds. If this number is lower than 4.15 you will need to install the new software.

Installing the software
You must have a computer connected to the T-Max Manager, Manager Plus or Manager Pro. Your new spa bed will arrive with a T-Max software upgrade CD. Insert the CD into your computer and the installer program should load automatically. Simply follow the steps on the computer screen to install the software. If the installer does not automatically open:

1. click the 'Start' button on your computer desktop.
2. Click 'Run' in the Start menu.
3. Type D:\setup.exe (where D: represents your disk drive).

Complete instructions are included with the CD